E36232A 200W Autoranging Power Supply, 60V, 10A
Share:
Key Features & Specifications
Output Rating- 200 W
- Output 1: 0 to 60 V, 0 to 10 A
Programming Accuracy ± (% of output + offset)
- Voltage: 0.03% + 8 mV
- Current: 0.1% + 3 mA
Ripple & Noise (20 Hz to 10 MHz)
- Normal Mode Voltage: <350 µVrms / 3.5 mV p-p
- Normal-mode current: <1 mA rms
Readback Accuracy ± (% of output + offset)
- Voltage: 0.03% + 8 mV
- Current: 0.1% + 3 mA
- Low Range Current, <50 mA: 0.25% + 80 uA
Description
The E36200 series consists of two 200 W single output power supplies and two 400 W dual output power supplies. Autoranging technology provides the highest current available at all output voltage. Power devices with up to 40 A (E36233A) or voltage up to 120 V (E36234A) using auto-parallel or auto-series to internally connect the two outputs into a single output with twice the power. A single output supply can power devices requiring up to 200 W. A dual output supply provides two independent 200 W channels which can be combined into a single 400 W channel.
Useable power 200 & 400 W
- Autoranging more current at all voltage settings
- Auto-parallel for higher current up to 40 A
- Auto-series for higher voltage up to 120 V
- Variable slew rate to control inrush current
Low noise, DUT protection & precision measurements
- 350 μVrms noise
- Overvoltage, overcurrent and over-temperature protection
- Local 2–wire or remote 4-wire measurements
- Low range current measurement
Fully programmable power supply
- USB, LAN, digital I/O and optional GPIB
- BenchVue PS application
- E3633A/34A mode
Advanced features
- Data logger
- Output LIST
