Masterflex P-07528-10, L/S® Variable-Speed Digital Drive with Remote I/O, 6 to 600 rpm; 90 to 260 VAC
Masterflex P-07528-10, L/S® Variable-Speed Digital Drive with Remote I/O, 6 to 600 rpm; 90 to 260 VAC
INCLUDES
6-ft (1.8-m) line cord with IEC 320/CEE22 socket. These models are shipped with country-specific plug/cord set;
please specify ultimate destination when ordering.
KEY FEATURES
- Flow rate 0.06 to 3400 mL/min—flow rate depends on drive rpm, pump head, and tubing size
- Three digit LED display shows motor rpm — confirm speed setting at a glance
- Reversible motor—purge tubing before or after pumping; pump fluid in either direction
- LED indicators confirm motor direction
- Powerful motors let you stack 2 or 4 pump heads for increased flow rates and for multichannel applications
- Separate speed and power (on/off) control — maintain speed setting while turning pump on/off
- Stackable, splash-resistant ABS plastic housing; IP33 rated
- Remote control capabilities via a DB9 female connector on back of drive
- Speed control input: 4 to 20 mA or 0 to 10 VDC
- Pump direction (CW/CCW) via open collector or contact closure
- Start/stop via open collector or contact closure
- Membrane keypad for easy up-front control of speed, direction, and start/stop
- Designed with speed range of 6 to 600 rpm
Specifications & Description
- Pump SeriesL/S
- Control TypeDigital Variable Speed
- Min RPM (rpm)6
- Max RPM (rpm)600
- SpeedVariable
- Speed Control±0.25% (1 rpm at 600 and 300 rpm; 0.1 rpm at 100 rpm)
- Max Flow Rate (mL/min)3400
- Min Flow Rate (mL/min)0.36
- Reversible MotorYes
- No. of Pump Heads Accepted2
- Type of Pump Heads AcceptedStandard, Easy-Load, Easy-Load II, Easy-Load 3, High Performance, Cartridge, Multichannel, PTFE Tubing, PTFE Diaphragm
- Motor (watts)75
- Drive IP ratingIP 33
- Power (VAC)90 to 260
- Power (amps)2.2
- Power (Hz)50/60
- Drive Length (in)10.7968
- Drive Width (in)8.3125
- Drive Height (in)8.5
- Drive Length (mm)274
- Drive Width (mm)211
- Drive Height (mm)216
- Open-Head SensorNo
- Housing MaterialABS Plastic and Aluminum
- Motor hp1/10
- Remote I/O4 to 20 mA, 0 to 10 V, start/stop and direction via contact closure
- DescriptionVariable-Speed Drive w/ Remote I/O; 600 rpm