Masterflex I/P® Digital Modular Drive - EW-07594-00

Category: Pump Drives

Flow rate 0.0006 to 26 LPM with I/P tubing—flow rate depends on drive rpm, pump head, number of pump heads, and tubing size
Digital interface with graphical LCD shows pump performance and operating mode— continuous run, timed dispense, copy dispense, or volume dispense
Remote control available using analog communication—voltage, current and contact closure
Select your preferred language from the user-friendly menu for programming and operation
Dispense by Volume in mL (0.001 to 9,999 mL), L, or gal; Copy—1 to 9,999 dispense cycles; or Time—time interval of on/off cycles (1 sec to 99 hr, 59 min, 59 sec per cycle)
Antidrip function ensures dispensing accuracy
Brushless, maintenance-free motor offers ±0.1% speed control accuracy with a 6000 to 1 turndown ratio
Reversible motor—purge tubing before or after pumping and pump fluid in either direction
Powerful motor lets you stack two pump heads for increased flow rates and for multichannel applications
Splash-resistant ABS plastic controller and epoxy finished steel drive housings are IP33 rated

Specifications & Description

Pump SeriesI/P
Control TypeDigital Variable Speed
Min RPM (rpm)0.1
Max RPM (rpm)650
SpeedVariable
Speed Control±0.1%
Max Flow Rate (LPM)26
Min Flow Rate (LPM)0.0006
Max Flow Rate (mL/min)26000
Min Flow Rate (mL/min)0.6
Reversible MotorYes
Digital DispensingYes
No. of Pump Heads Accepted2
Type of Pump Heads AcceptedI/P Standard, I/P Easy-Load, I/P High-Performance
Motor (watts)280
Controller IP ratingIP 33
Motor IP ratingIP 33
Power (VAC)90 to 260
Power (amps)4.5
Power (Hz)50/60
Controller Length (in)10.3437
Controller Width (in)8.3281
Controller Height (in)5.5
Controller Length (mm)263
Controller Width (mm)211
Controller Height (mm)140
Motor Length (in)14.25
Motor Width (in)7
Motor Height (in)6.5
Motor Length (mm)362
Motor Width (mm)178
Motor Height (mm)165
Open-Head SensorNo
Housing MaterialABS Plastic and Aluminum Controller; Painted Steel and Aluminum Drive
Motor hp3/8
Remote I/O0 to 20 mA, 4 to 20 mA, 0 to 10 V, start/stop, direction, and prime via contact closure
DescriptionI/P Digital Modular Drive w/ Remote I/O; 650 rpm