DRY C and DRY CR series Ultimate pressure: up to 100 mbar Pumping speed: 60÷1140 m3/h
Share:
DRY C and DRY CR series Ultimate pressure: up to 100 mbar Pumping speed: 60÷1140 m3/h
The compression chamber is free of lubricating or sealing fluids.
The gears are oil bath type and the same oil is used to lubricate the bearings. The oil sump is separated from the compression chamber by labyrinth seals.
Cooling is guaranteed by a fan.
The electric motor is flanged and connected to the lower shaft with a coupling.
The DRY C and DRY CR pump series are suitable for the evacuation of closed systems or to operate at an absolute maximum constant vacuum:
DRY C 100 up to 150 mbar (abs.)
DRY C 250 - 300 up to 200 mbar (abs.)
DRY CR 60 up to 100 mbar (abs.)
DRY CR 150 - 400 - 500 - 1000 up to 200 mbar (abs.)
The pumps of the DRY CR series are equipped with silencer and built-in non returm valve.
ACCESSORIES
The following accessories are useful for the installation and for the control of the pump operation parameters:
- Discharge silencer (DRY C)
- Inlet non-return valve
- External inlet filter
- Vacuum gauges / vacuostats