491-8450 - Lapp UNITRONIC Control Cable, 4 Cores, 0.34 mm2, Screened, 100m, Grey PVC Sheath, 22 AWG
Share:
491-8450 - Lapp UNITRONIC Control Cable, 4 Cores, 0.34 mm2, Screened, 100m, Grey PVC Sheath, 22 AWG
Product Details
LAPP Control Cable, 4 Cores, 22AWG - UNITRONIC Series - 0034504
Use this control cable from LAPP to send signals to and from computers or electronic control devices. Its wires are DIN colour-coded, which helps increase safety by allowing easy identification of each wire's function. The cable's PVC core insulation assists in preventing electrical leakage and provides protection to the wires for increased durability and a long service life. Integrated screening reduces electrical interference, which helps to improve the stability of the signal transmission.
Features & Benefits
• 100m length is simple to cut to the desired length for your application
• Flame-retardant to prevent the spread of a workplace fire
• 0.34mm² cross-sectional area, for use in areas where space is limited
• Wide operating temperature range between -40°C and +80°C when fixed and -5°C to +70°C with occasional flexing, for safe industrial use
Specifications
| Attribute | Value |
| Series | UNITRONIC |
| Number of Cores | 4 |
| Cross Sectional Area | 0.34 mm² |
| Screened/Unscreened | Screened |
| Length | 100m |
| Sheath Colour | Grey |
| American Wire Gauge | 22 AWG |
| Screen Type | Tinned Copper Braid |
| Outer Diameter | 5.7mm |
| Current Rating | 6 A |
| Core Strands | 7/0.25 mm |
| Minimum Operating Temperature | -40°C |
| Maximum Operating Temperature | +80°C |
| Sheath Material | Polyvinyl Chloride PVC |
| Voltage Rating | 250 V |
| Fire Behaviour | Flame Retardant |
| Insulation Material | PVC |
| Conductor Material | Copper |
| Reference | UNITRONIC LiYCY |
| Filler Material | Non-Wicking Filler |
| Conductor Resistance | 57 Ω/km |
| Shielded/Unshielded | Shielded |
| Earth Cable | No |
| Bedding Material | Mylar |
| Minimum Bend Radius | Fixed - 6 x D Occasional Flexing - 15 x D |
| Oil Resistant | Yes |
