Turbo-V 3K-G
- The only truly "integrated" system on the market
- Highest pumping speeds in its class
- Oil-free, robust and reliable
- MTTF of more than 200,000 hours
- Leading edge rotor design provides significant reduction in weight and mechanical stress
- Patented rotor-shaft fitting eliminates rotor tensile stress
Tech Specs
Pumping speed With ISO 250F: |
N2: 2200 l/s Ar: 2050 l/s He: 1900 l/s |
Compression ratio |
N2: >1 x 107 Ar: >1 x 108 He: 6 x 103 |
Throughput (sccm) | >1400 for Nitrogen |
Base pressure (mbar) | <10-8 |
Inlet flange | ISO 250F |
Foreline flange | KF40 NW |
Rotational speed | 31800 RPM |
Start-up time | < 6 minutes |
Foreline pressure | < 0.5 mbar |
Recommended forepump | > 60m3/h (depending on gas flow requirements) |
Operating position | Any |
Cooling methods | Water |
Weight | 52Kg |
Ordering Information
Description | Part Number |
Turbo-V 3K-G Pumping Systems | |
Turbo-V 3K-G ISO 250 F System with MoniTorr and integrated purge/vent device | 969-8888 |
Turbo-V 3K-G ISO 250 F System with MoniTorr and Profibus and integrated purge/vent device | 969-8889 |
(*) Pumping Systems include Pump with 230V Integrated Electronics, Inlet Screen installed on the pump, separate center-ring and pre-installed IP54 Mating Connectors. Both standard models are equipped with Varian s MoniTorr device. 120VAC units available on request | |
Accessories | |
Mains cable NEMA Plug, 3m long | 969-9958 |
Mains cable European Plug, 3m long | 969-9957 |
T-Plus Software and serial cable | 969-9883 |
Water cooling kit for 6x8 (IDxOD) flexible tube | 969-9348 |
Water cooling kit for 3/8 in.ID flexible tube | 969-9338 |
Spare Parts | |
IP54 proof mating connectors | 969-8960 |
Inlet screen ISO 250 | 969-9350 |
Centering ISO250 | 969-9144 |