SKF
Selected tag
Tag Selection
- SKF (11)
- Bearing Heaters (1)
- SKF Bearing Heater (2)
- Portable Induction Heater (1)
- TIH030M (1)
- Ball Bearings (3)
- 6305 (1)
- 6316/C3 (1)
- Deep Groove Ball Bearing (1)
- W6305-2RS1 (1)
- Stainless Steel Deep Groove Ball Bearings (1)
- Ball Bearing (1)
- plummer block housings (1)
- SNL216 (1)
- SKF Ring Seal (1)
- TS56 (1)
- SKF Pillow Block Bearing (1)
- SY 50 FM (1)
- SYFWK 20 LTHR (1)
- Pillow Block Bearing (1)
Attribute Value Inside Diameter 20mm Material Stainless Steel Bearing Unit Type Pillow Block Centre Height 33.3mm Mount Hole Size M8 Length 72.8mm Depth 34.5mm Overall Height 66mm Mount Hole Centre-to-Centre 50.
More Details...
Attribute Value Inside Diameter 25mm Outside Diameter 62mm Ball Bearing Type Deep Groove Race Width 17mm End Type Sealed Number of Rows 1 Static Load Rating 2.
More Details...
Attribute Value Inside Diameter 80mm Outside Diameter 170mm Ball Bearing Type Deep Groove Race Width 39mm End Type Open Number of Rows 1 Static Load Rating 86.
More Details...
Accepts radial and axial loads
High speed operation
Primarily intended for applications where the bearing inner ring rotates
If the outer ring rotates there is a danger that grease may be lost from the bearing at high speeds
Features and Benefits
• Power setting options and yokes (X3) mean that smaller bearings can be heated safely, and with a lower power consumption
• Equipped with automatic demagnetisation, lowering the risk of ferrous debris contamination after the use of the heater
• Capable of heating a 28kg bearing in 20 min
• Compact, lightweight
More Details...
SKF Electric Hot Plate - 729659C
Installing a bearing can sometimes involve a wealth of tools and a lot of physical force.
Through the use of our SKF electric hot plate, the sets of tools and force required can be heavily reduced.
More Details...
The SKF medium induction heater TIH 100m has the same high standards of efficiency and performance as the small heater combined with increased capacity.
The advanced design of the power electronics allows features of accurate electric current control, cut-outs to avoid overheating, controls on rate of temperature increase, these are as some of the standard features in the TIH...
More Details...