RS

Product Details Metric Gauge Block Sets (Grade 1 Inspection)
Manufactured from high quality age hardened alloy steel
Heat treated to HRC65/HV820 for high wear resistance
High quality surface finish
Steel gauges should be cleaned after use to avoid corrosion
Grade 1 inspection Standards BS EN ISO 3650: 1999 Supplied with Full 5-point UKAS Calibration

Product Details RS PRO Gauge Block Set Steel Metric, 87 piece
This gauge block set is an essential tool for precise calibration and measurement, enabling you to obtain the highest degree of accuracy. With the 87 different pieces, which can be used separately or in combination, you can easily determine exact lengths.

Product Details RS PRO Gauge Block Set Steel Metric, 47 piece
Providing the accuracy you need across a broad range of scales, this gauge block set is essential for precise calibration and measurement. It comprises 47 different pieces, which can be used separately or in combination to determine the exact distances between surfaces.

Product Details 1-2-3 Blocks
Blocks supplied in precision ground matched pairs
Each block measures 1 x 2 x 3in
Through hole size is 3//8 UNC clearance (0.377inch)
5 holes on the largest face are tapped 3//8 UNC (The centre and 4 adjacent diagonal holes)
Manufactured from tool steel, hardened to 58-60 Rc.

Product Details 10-Piece Angle Block Set
An angle block set for setting and checking angles in production or inspection areas.,Each block is manufactured from 1//4 in. (6.35mm) thick hardened steel, nominal length 3 inches.,Supplied in a hardwood storage case.

Product Details Kern Analogue Shore Hardness Tester
A compact hand held durometer with drag indicator. Ideal for internal comparison measurement. Supplied in a wooden carrying case for safe and secure storage.

Product Details Sauter Hardness Meter
The Sauter hardness meter is an analogue shore D tester used to test the hardness of different types of material. This tester allows conducting comparison tests quickly and safely for determining the hardness. The different types of penetration depths are known as 'shore'.

Product Details Mitutoyo Hardmatic Durometer
The Mitutoyo hardmatic durometer is a long-leg, analogue dial display durometer in the shore A. The scale can test a range of different materials. This is provided with a peak retaining hand for error-free reading.

Product Details HARDMATIC Durometer
Professional analogue and digital durometers designed to test a range of different materials.
SR44 Battery.

Product Details Sauter Hardness Meter
The Sauter hardness meter is an analogue shore a tester used to test the hardness of different types of material. This tester allows conducting comparison tests quickly and safely for determining the hardness. The different types of penetration depths are known as 'shore'.

Product Details RS PRO Durometer
Evaluate the surface of soft materials quickly and accurately with this hardness tester from RS PRO. Also referred to as a Shore A durometer, it can be used to take hardness measurements in rubber, PVC, elastomers, neoprene and leather.

Product Details RS PRO Durometer
If you're making parts from soft materials and need to test their hardness, this digital Shore A durometer from RS PRO is an ideal solution. It provides quick and reliable hardness measurements for rubber, PVC, elastomers, neoprene and leather.

Product Details RS PRO Durometer
If you're making parts from soft materials and need to test their hardness, this digital Shore A durometer from RS PRO is an ideal solution. It provides quick and reliable hardness measurements for rubber, PVC, elastomers, neoprene and leather.

Product Details Mitutoyo Lever Indicator
The Mitutoyo 513 series horizontal lever indicator has a dial reading of 0-40-0 and a maximum resolution of 0.01mm. It is professional, non-magnetic type measuring instrument that can reach places conventional indicators cannot. The non-magnetic pointer and contact point permit reliable operation even in magnetic environments.

Product Details Mitutoyo Lever Indicator
The Mitutoyo 513 series horizontal lever indicator has a dial reading of 0-70-0 and a maximum resolution of 0.001mm. It is professional, non-magnetic type measuring instrument that can reach places conventional indicators cannot. The non-magnetic pointer and contact point permit reliable operation even in magnetic environments.

Product Details Lever Indicator
General purpose lever dial indicator
Reversing mechanism
Dovetail mount on top, rear and bottom faces
Dial bezel

Product Details RS Lever Dial Indicator
Lever type dial indicators are great measuring instruments for the workshop and inspection rooms. The fine reading Lever Indicator has fully jewelled movement and an adjustable bezel. The dial hand also moves clockwise for either forward or reverse stylus movement.

Product Details RS PRO Metric DTI Gauge, +0.8 mm Max. Measurement, 0.01 mm Resolution, ±0.02 mm Accuracy
Need to check that your parts and materials are within tolerance, or that machines such as lathe tailstocks are properly aligned? This Digital Test Indicator (DTI) gauge from RS PRO can be used to take measurements up to 0.8 mm. It's accurate to within ±0.

Product Details RS PRO Both Lever Dial Indicator, +0.8 mm max. Measurement, 0.01 mm Resolution, ±0.008 mm Accuracy
This lever dial indicator is used to measure surface variations of a component or for comparison of multiple components.

With dial graduations of 0.01 mm and an accuracy level of ±0.

Product Details RS PRO Metric DTI Gauge, +0.2 mm Max. Measurement, 0.002 mm Resolution, ±0.02 mm Accuracy
Need to align your equipment to a high degree of accuracy? Use this dial-test indicator from RS PRO. It's suitable for giving accurate readings in science, technology and manufacturing applications.

Product Details RS PRO Metric DTI Gauge, ±0.4 mm Maximum Measurement, 0.01 mm Resolution, 0.01 mm FSD Accuracy
This dial-test indicator from RS PRO is a mechanical measuring instrument to help properly align equipment. It accurately measures small distances and angles and then amplifies them, so you can precisely adjust machine parts.

Product Details
Range: 0-1mm
Resolution: 0.001mm
40mm dial face
Adjustable dial
Bezel lock
Lug back fitting
Tolerance pointers
Fitted with ball anvil
Anvil thread M2.