RS, Engineering Test

Product Details
A thread limit plug gauge is a combination of go plug gauge and no-go plug gauge. The scrap side of the thread plug gauge is marked with a red ring.The go end of the thread plug gauge must screw into the thread cut into a part by hand (without using excessive force). If unable to do so, the thread does not meet the requested standards (=scrap).

Product Details Volkel Go No-Go Plug Gauge
The Volkel Go No-Go plug gauge M4x0.7 is a combination of go and No-Go plug gauge. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread scanners. This gauge must screw into the part by hand more than two threads.

Product Details Volkel Go No-Go Plug Gauge
The Volkel Go No-Go Plug Gauge M5x0.8 is calibrated at measurement laboratory using IAC thread scanners. The scrap side of this thread plug gauge is marked with a red ring. This gauge must screw into the part by hand more than two threads. If unable to do so, the thread does not meet the requested standards.

Product Details Volkel No-Go Ring Gauge
The Volkel No-Go ring gauge M16x2 is calibrated at a measurement laboratory using IAC thread scanners. This NO-GO thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference temperature for parts and gauge is 20°C. It is made from high-quality raw material.

Product Details Volkel Go Ring Gauge
The Volkel Go ring gauge M10x1.5 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges is 20°C. It is made from high-quality raw material.

Product Details Volkel Go Ring Gauge
The Volkel Go ring gauge M12x1.75 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges is 20°C. It is made from high-quality raw material.

Product Details Volkel Go No-Go Plug Gauge
The Volkel Go No-Go plug gauge M12x1.75 is a combination of GO and NO-GO plug gauge. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread scanners. This gauge must screw into the part by hand more than two threads.

Product Details Volkel Go Ring Gauge
The Volkel No-Go ring gauge M8x1.25 is calibrated at a measurement laboratory using IAC thread scanners. This No-Go thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference temperature for parts and gauge is 20°C. It is made from high-quality raw material.

Product Details Volkel Go Ring Gauge
The Volkel Go ring gauge M6x1 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges is 20°C. It is made from high-quality raw material.

Product Details Volkel Go Ring Gauge
The Volkel Go ring gauge M16x2 is calibrated at a measurement laboratory using IAC thread scanners. This gauge must be possible to manually screw into the entire thread of the part, without using excessive force. The reference temperature for parts and gauge is 20°C. It is made from high-quality raw material.

Product Details Volkel Go Ring Gauge
The Volkel Go ring gauge M4x0.7 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges is 20°C. It is made from high-quality raw material.

Product Details Volkel No-Go Ring Gauge
The Volkel No-Go ring gauge M8x1.25 is calibrated at measurement laboratory using the IAC thread scanners. This No-Go thread gauge is marked in red. This thread No-Go ring gauge must not screw into the part by hand by more than two threads. The reference temperature for parts and gauge is 20°C.

Product Details Volkel Go No-Go Plug Gauge
The Volkel Go No-Go plug gauge M6x1 is a combination of GO and NO-GO plug gauge. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread scanners. This gauge must screw into the part by hand more than two threads.

Product Details Volkel Go Ring Gauge
The Volkel Go ring gauge M20x2.5 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges is 20°C. It is made from high-quality raw material.

Product Details Volkel No-Go Ring Gauge
The Volkel No-Go ring gauge M3x0.5 is calibrated at a measurement laboratory using IAC thread scanners. This NO-GO thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference temperature for parts and gauge is 20°C. It is made from high-quality raw material.

Product Details Volkel Go No-Go Plug Gauge
The Volkel Go No-Go plug gauge M20x2.5 is a combination of GO and NO-GO plug gauge. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread scanners. This gauge must screw into the part by hand more than two threads.

Product Details Volkel Go No-Go Plug Gauge
The Volkel Go No-Go plug gauge M10x1.25 is a combination of GO and NO-GO plug gauge. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread scanners. This gauge must screw into the part by hand more than two threads.

Product Details Volkel No-Go Ring Gauge
The Volkel No-Go ring gauge M12x1.75 is calibrated at a measurement laboratory using IAC thread scanners. This No-Go thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference temperature for parts and gauge is 20°C. It is made from high-quality raw material.

Product Details Volkel Go No-Go Plug Gauge Set
The Volkel Go No-Go plug gauge set consists of seven pieces of thread gauges in a sturdy plastic case. It is a combination of GO and NO-GO plug gauges. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread scanners.

Product Details
The Facom has micrometer having accuracy of 0.01 mm. The force applied on the part included strictly between 5 and 10 Nm. The measuring range of micrometer is 0 - 25 mm.

Product Details
The Facom has micrometer having accuracy of 0.01 mm. The force applied on the part included strictly between 5 and 10 Nm. The measuring range of micrometer is 25 - 50 mm.

Product Details
The Facom has universal calliper for interior, exterior measurement. The measurement capacity of calliper is 300 mm. The calliper has stainless steel rule with mat finish and rule hardness is 40 HRc minimum.

Product Details
The Facom has exterior micrometer with extension 1/100th mm accuracy. The force applied on the part included strictly between 5 and 10 N.m and ratchet drum with torque limiter.

Product Details
The Facom digital display micrometer is compatibility with gagewedge software and has stand by position without loss of origin. It has adjustable measuring force 10 N and 10000 hrs continuous operating time.
Accuracy 0.001 mm
Measurement range 0 to 25 mm Specifications Attribute Value Accuracy 0.