RS Pro
Selected tag
Tag Selection
- RS Pro (294)
- Ratchet Handle (1)
- Mechanical Tool Kit (1)
- Combination Spanners (1)
- Screwdriver Bits (1)
- Oscilloscope (19)
- 123-6435 (1)
- Bench Power Supply (1)
- 123-6469 (1)
- Ball Bearings (3)
- 619-0317 (1)
- 893-7458 (1)
- 176-6698 (1)
- Linear Guide (1)
- Spectrum Analyser (2)
- 123-6443 (1)
- 191-9723 (1)
- Function Generator (2)
- 191-9727 (1)
- Air Quality Monitors (1)
- 236-2654 (1)
- Digital Thermometer (1)
- 236-9191 (1)
- Refractometers (1)
- 210-7487 (1)
- Gauge Block Sets (1)
- Gauge Block Set (1)
- Process Control (64)
- Digital Timer Switch (1)
- Timer (1)
- Lockout Kit (1)
- Site Safety (1)
- Lockout Starter Kit (1)
- 124-4134 (1)
- Hot Air station (1)
- Soldering Stations (19)
- RS PRO Temperature Calibrator (1)
- Calibrator (1)
- Micrometers (1)
- Engineering Test & Measurement Micrometers (1)
- Cables & Wires (52)
- Socket CEE Extension Lead (1)
- Extension Lead (9)
- German Schuko Extension Lead (11)
- 4 Socket Cable Reel (1)
- British Extension Lead (6)
- French Cable Reel (3)
- Cables & Wires (428)
- French Extension Lead (5)
- Danish Extension Lead (4)
- Danish Trailing Socket (2)
- 6 Socket Trailing Socket (2)
- Cable Reel (1)
- Trailing Socket (2)
- 50m Extension Lead Kit (1)
- 10m Extension Lead (1)
- 2 x 8 Socket Extension Lead (1)
- Mechanical Power Transmission (219)
- Drive Belt (68)
- Flexible Coupling Flectors (64)
- Flexible Couplings (86)
Product Details
Oldham Style Couplings - Clamp Style
Clamp style couplings for use with heavy power transmission at moderate speeds.
Huco Oldham Style Couplings
Backlash-free
Can handle large radial shaft misalignment
Constant low bearing side loads
Electrically isolating
Note
Not sold as an assembled unit.
More Details...
Product Details
Torque Discs
Polyurethane spider provides damping of impulse loads, minimising shock to the motor and other sensitive equipment. Offered in two hardness levels the spiders can be used to customise the coupling performance.
More Details...
Product Details
Uni-Lat® Couplings
Uni-Lat lateral displacement couplers uniquely combine the mechanisms of the universal joint and the Oldham type coupling to compensate for simultaneous parallel and angular shaft offsets. Parallel misalignment is accommodated by lateral displacement, therefore Uni-Lats can handle severe alignment errors.
More Details...
Product Details
Oldham Style Couplings - Clamp Style
Clamp style couplings for use with heavy power transmission at moderate speeds.
Huco Oldham Style Couplings
Backlash-free
Can handle large radial shaft misalignment
Constant low bearing side loads
Electrically isolating
Note
Not sold as an assembled unit.
More Details...
Product Details
Set Screw Style
Note
Only one hub is supplied. Two hubs and a torque disc will be required for a complete assembly. These parts are sold separately.
Note
These parts must all be ordered separately
Jaw Couplings
A range of zero backlash curved jaw couplings.
More Details...
Specifications Attribute Value Bore 10mm Coupling Types Bellows Coupling Outside Diameter 17mm Length 27mm Torque Rating 1.32Nm Misalignment - Angular 18° Misalignment - Parallel +3 → -4mm Misalignment - Axial 1.
More Details...
Product Details
Oldham Style Couplings - Clamp Style
Clamp style couplings for use with heavy power transmission at moderate speeds.
Huco Oldham Style Couplings
Backlash-free
Can handle large radial shaft misalignment
Constant low bearing side loads
Electrically isolating
Note
Not sold as an assembled unit.
More Details...
Product Details
Aluminium Flexible Shaft Couplings
Designed to perform where higher speeds, greater misalignment, and limited lubrication would exceed the capabilities of other couplings. Each coupling is manufactured as one piece, thereby eliminating mechanical joints and possible failure points.
More Details...
Product Details
Oldham Style Couplings - Clamp Style
Clamp style couplings for use with heavy power transmission at moderate speeds.
Huco Oldham Style Couplings
Backlash-free
Can handle large radial shaft misalignment
Constant low bearing side loads
Electrically isolating
Note
Not sold as an assembled unit.
More Details...
Product Details
Oldham Style Couplings - Clamp Style
Clamp style couplings for use with heavy power transmission at moderate speeds.
Huco Oldham Style Couplings
Backlash-free
Can handle large radial shaft misalignment
Constant low bearing side loads
Electrically isolating
Note
Not sold as an assembled unit.
More Details...
Product Details
Double Loop Couplings
Flexible couplings suitable for the correction of radial, angular, and axial misalignment. The hubs are manufactured from stainless steel for corrosion resistance and connected with a Hytrel polyester elastomer flex element giving excellent strength and heat and chemical resistance.
More Details...
Product Details
Rexnord Omega Elastomer Couplings - Element E (Short)
The Rexnord Omega E element is made from a unique general purpose elastomer with a split element design providing easy assembly. The design permits faster installation and reduced inventories by providing multiple distances between shaft ends using the same elements and hubs.
More Details...
Product Details
Rexnord Viva Elastomer Coupling
This elastomeric coupling range from Rexnord is low maintenance requiring no lubrication. The soft polymer element is able to cope with, and correct for considerable mis-alignment.
More Details...
Product Details
The KTR ROTEX GS green coloured three part axial plug in vibration reducing jaw type coupling . Thus different hub designs and the different shore harnesses' offer the optimal coupling for each application in automation engineering. The coupling is used in machine tools, automation, power transmission, medical technology, packaging technology.
More Details...
Product Details
KTR Jaw Couplings - Hub
A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored.
Note
Each Coupling requires two hubs and a spider.
More Details...
Product Details
The KTR ROTEX GS blue coloured three part axial plug in vibration reducing jaw type coupling . Thus different hub designs and the different shore harnesses' offer the optimal coupling for each application in automation engineering. The coupling is used in machine tools, automation, power transmission, medical technology, packaging technology.
More Details...
Product Details
Rexnord Omega Elastomer Couplings - Element ES (Long)
The Rexnord Omega E element is made from a unique general purpose elastomer with a split element design providing easy assembly. The design permits faster installation and reduced inventories by providing multiple distances between shaft ends using the same elements and hubs.
More Details...
Product Details
The KTR ROTEX GS three part axial plug in vibration reducing jaw type coupling. Thus different hub designs and the different shore harnesses' offer the optimal coupling for each application in automation engineering. The coupling is used in machine tools, automation, power transmission, medical technology, packaging technology.
More Details...
Product Details
KTR Jaw Couplings - Hub
A range of hubs from KTR for use with the ROTEX range of jaw coupling spiders. Available in various sizes and in aluminium, steel and cast iron (dependant upon size). Hubs come pilot bored.
Note
Each Coupling requires two hubs and a spider.
More Details...
Product Details
The KTR ROTEX GS three part axial plug in vibration reducing jaw type coupling . Thus different hub designs and the different shore harnesses' offer the optimal coupling for each application in automation engineering. The coupling is used in machine tools, automation, power transmission, medical technology, packaging technology.
More Details...