RS

Product Details Mitutoyo Digimatic Thickness Gauge
The Mitutoyo Digimatic thickness gauge has a range between 0mm and 10mm and maximum measuring depth of 30mm. This professional digital gauge is easy to use while also being quick and efficient. It has an ABS feature that determines its absolute position from the origin at power ON by employing an absolute linear encoder.

Product Details Sauter Thickness Gauge
The Sauter thickness gauge has a maximum measuring range of 1250μm. It is small, light in weight and easy to carry. It has sensors that can measure the thickness of non-magnetic coatings and also a non-magnetic coating on non-magnetic metals. It is suitable for laboratory as well as for use under harsh field conditions.

Product Details Mitutoyo Digimatic Thickness Gauge
The Mitutoyo Digimatic thickness gauge has a range between 0mm and 12mm and maximum measuring depth of 21mm. This professional digital gauge is easy to use while also being quick and efficient. It has an ABS feature that determines its absolute position from the origin at power ON by employing an absolute linear encoder.

Product Details RS PRO Thickness Meter, 0.3 mm (Probe N), 0.5 mm (Probe F) - 1350 μm (Probe F & Probe N), LCD Display
Measure the coatings on your surfaces with this thickness meter from RS PRO. It's suitable for testing non-magnetic coatings like paint or zinc on steel, as well as insulating coatings on non-ferrous metals.

Product Details RS Pro Digital Thickness Gauge
RS Pro digital thickness gauge designed to measure a wide variety of materials from metal to sheets paper. The RS Pro gauge features a digital readout and includes a lanyard ring for accessibility.

Product Details
The Mitutoyo deep groove detector is a standard and optional accessories for surftest which is applicable in the measuring the roughness of the surface.

Product Details
The Mitutoyo Surftest SJ-210 [mm] is a portable measuring instrument that allows you to easily and accurately measure surface roughness. The product works independently of mains power, allowing you to make on-site measurements. It performs roughness analyses conform to various international standards (EN ISO, VDA, ANSI, JIS) and customized settings.

Product Details
The Mitutoyo provide a portable measuring instrument that allows you to easily and accurately measure surface roughness. It have skid system which gives user friendly and intuitive menu navigation. It works independently of mains power, allowing you to make on-site measurements.

Product Details
The Mitutoyo SJ-210 series standard drive unit type detector has measuring force of 4mN. It has a measuring range of 16mm for X-axis a nd 360μm for Z-axis.

Product Details
The Mitutoyo SJ-210 series standard drive unit type detector has measuring force of 0.75mN. It has a measuring range of 16mm for X-axis a nd 360μm for Z-axis.

Product Details
The Mitutoyo standard stylus has tip radius of 2μm.
Standard accessory
Stylus 2μm Specifications Attribute Value Roughness Tester Accessory Type Standard Stylus Measuring Range 2000Nm Measuring Speed 0.

Product Details
The Mitutoyo detector is a standard and optional accessories for surftest which is applicable in the measuring the roughness of the surface.

Product Details
The thread NO-GO ring gauge must not screw into the part by hand more than two threads (without using excessive force). If the ring gauge can be screwed into the thread by more than two threads, the thread does not meet the desired requirements (=scrap). The no-go thread gauges are marked in red.

Product Details
A thread limit plug gauge is a combination of go plug gauge and no-go plug gauge. The scrap side of the thread plug gauge is marked with a red ring. The go end of the thread plug gauge must screw into the thread cut into a part by hand (without using excessive force). If unable to do so, the thread does not meet the requested standards (=scrap).

Product Details
A thread limit plug gauge is a combination of go plug gauge and no-go plug gauge. The scrap side of the thread plug gauge is marked with a red ring.The go end of the thread plug gauge must screw into the thread cut into a part by hand (without using excessive force). If unable to do so, the thread does not meet the requested standards (=scrap).

Product Details Volkel No-Go Ring Gauge
The Volkel Go ring gauge M4x0.7 is calibrated at a measurement laboratory using IAC thread scanners. These NO-GO thread gauges are marked in red. This thread NO-GO ring gauge must not screw into the part by hand by more than two threads. The reference temperature for part and gauges is 20°C.

Product Details Volkel Go Ring Gauge
The Volkel Go ring gauge M2x0.5 is calibrated at a measurement laboratory using IAC thread scanners. It is possible to manually screw into the entire thread of the part without using excessive force. The reference temperature for part and gauges is 20°C. It is made from high-quality raw material.

Product Details Volkel Go No-Go Plug Gauge
The Volkel Go No-Go plug gauge M8x1.25 is a combination of GO and NO-GO plug gauge. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread scanners. This gauge must screw into the part by hand more than two threads.

Product Details Volkel Go No-Go Plug Gauge
The Volkel Go No-Go plug gauge M14x2 is calibrated at measurement laboratory using IAC thread scanners. The scrap side of this thread plug gauge is marked with a red ring. This gauge must screw into the part by hand more than two threads. If unable to do so, the thread does not meet the requested standards.

Product Details
A thread limit plug gauge is a combination of go plug gauge and no-go plug gauge. The scrap side of the thread plug gauge is marked with a red ring.The go end of the thread plug gauge must screw into the thread cut into a part by hand (without using excessive force). If unable to do so, the thread does not meet the requested standards (=scrap).

Product Details Volkel Go No-Go Plug Gauge
The Volkel Go No-Go plug gauge M4x0.7 is a combination of go and No-Go plug gauge. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread scanners. This gauge must screw into the part by hand more than two threads.

Product Details Volkel Go No-Go Plug Gauge
The Volkel Go No-Go Plug Gauge M5x0.8 is calibrated at measurement laboratory using IAC thread scanners. The scrap side of this thread plug gauge is marked with a red ring. This gauge must screw into the part by hand more than two threads. If unable to do so, the thread does not meet the requested standards.

Product Details Volkel No-Go Ring Gauge
The Volkel No-Go ring gauge M16x2 is calibrated at a measurement laboratory using IAC thread scanners. This NO-GO thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference temperature for parts and gauge is 20°C. It is made from high-quality raw material.