RS

Product Details Volkel Go No-Go Plug Gauge
The Volkel Go No-Go plug gauge M10x1.25 is a combination of GO and NO-GO plug gauge. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread scanners. This gauge must screw into the part by hand more than two threads.

Product Details Volkel No-Go Ring Gauge
The Volkel No-Go ring gauge M12x1.75 is calibrated at a measurement laboratory using IAC thread scanners. This No-Go thread gauge is marked in red. It must not screw into the part by hand by more than two threads. The reference temperature for parts and gauge is 20°C. It is made from high-quality raw material.

Product Details Volkel Go No-Go Plug Gauge Set
The Volkel Go No-Go plug gauge set consists of seven pieces of thread gauges in a sturdy plastic case. It is a combination of GO and NO-GO plug gauges. The scrap side of this thread plug gauge is marked with a red ring. It is calibrated at a measurement laboratory using IAC thread scanners.

Product Details
The Facom has micrometer having accuracy of 0.01 mm. The force applied on the part included strictly between 5 and 10 Nm. The measuring range of micrometer is 0 - 25 mm.

Product Details
The Facom has micrometer having accuracy of 0.01 mm. The force applied on the part included strictly between 5 and 10 Nm. The measuring range of micrometer is 25 - 50 mm.

Product Details
The Facom has universal calliper for interior, exterior measurement. The measurement capacity of calliper is 300 mm. The calliper has stainless steel rule with mat finish and rule hardness is 40 HRc minimum.

Product Details
The Facom has exterior micrometer with extension 1/100th mm accuracy. The force applied on the part included strictly between 5 and 10 N.m and ratchet drum with torque limiter.

Product Details
The Facom digital display micrometer is compatibility with gagewedge software and has stand by position without loss of origin. It has adjustable measuring force 10 N and 10000 hrs continuous operating time.
Accuracy 0.001 mm
Measurement range 0 to 25 mm Specifications Attribute Value Accuracy 0.

Product Details
The Facom has exterior friction micrometer with 1/100th mm accuracy. The micrometer has ratchet drum with torque limiter and force applied on the part included strictly between 5 and 10 N.m.
Accuracy is 0.01 mm
Carbide plunger tip is Ø 6.

Product Details Outside Micrometer
Micrometer which is graduated in thousandths, but has an additional series of graduations on the thimble and sleeve which allows readings down to ten - thousandths of an inch or two thousandths of a millimetre.

Product Details Outside Micrometer
Micrometer which is graduated in thousandths, but has an additional series of graduations on the thimble and sleeve which allows readings down to ten - thousandths of an inch or two thousandths of a millimetre.

Product Details Ball Attachments
Micrometer ball attachments enable standard flat anvil micrometers to be adapted to measure concave or curved surfaces, such as tube wall thickness. Will fit most common Mitutoyo, Moore & Wright and Starrett micrometer anvils.

Product Details Mitutoyo 293 Series, IP65
Imperial or Metric reading
Large LCD display
Protected to IP65 for use where coolant may be present
Original setting and Auto power off
Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm Supplied with Batteries, instruction manual and storage case.

Product Details Mitutoyo 293 Series, IP65
Imperial or Metric reading
Large LCD display
Protected to IP65 for use where coolant may be present
Original setting and Auto power off
Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm Supplied with Batteries, instruction manual and storage case.

Product Details Mitutoyo Series 293 QuantuMike Micrometer
Coolant proof micrometer range rated to IP65 that gives a quick responce due to it's spindle design. It's rapid action is backed up by a highly stable frame and heat shield to provide professional results and high accuracy.

Product Details Cast Iron Frames Micrometer
Graduated 0.001in./0.

Product Details Mitutoyo 293 Series, IP65
Imperial or Metric reading
Large LCD display
Protected to IP65 for use where coolant may be present
Original setting and Auto power off
Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm Supplied with Batteries, instruction manual and storage case.

Product Details Mitutoyo Series 293 QuantuMike Micrometer
Coolant proof micrometer range rated to IP65 that gives a quick responce due to it's spindle design. It's rapid action is backed up by a highly stable frame and heat shield to provide professional results and high accuracy.

Product Details Cast Iron Frames Micrometer
Graduated 0.001in./0.

Product Details Mitutoyo Micrometer
The Mitutoyo MDC lite micrometre has a measurement range of 0mm to 25mm. This is high tech, lightweight, digital micrometre. It features the new electromagnetic absolute sensor, improving resistance to environmental conditions such as dirt, oil and water that can cause false readings. It has a measuring range of 0-25.

Product Details Quickmike Absolute
IP54 ingress protection
Non rotating, tungsten carbide tipped measuring faces
Origin setting
Data hold, data output
0-30mm in just 3 thimble revolutions
Accuracy ± 2μm, flatness 0.3μm, parallelism 2μm Supplied with Batteries, instruction manual and storage case.

Product Details Inside Micrometers
Precision manufactured to BS959
Accuracies of 0.01mm/0.0004in.
ranges of 50 to 300mm/2 to 12in.
Each set consists of a micrometer head with locking screw, 10 range identified measuring rods, 12mm/ 1/2in. lapped collar and 2 adjustment spanners
The micrometer has 13mm/ 1/2in. movement graduated (0.01mm/0.001in.

Product Details Mitutoyo 293 Series, IP65
Imperial or Metric reading
Large LCD display
Protected to IP65 for use where coolant may be present
Original setting and Auto power off
Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm Supplied with Batteries, instruction manual and storage case.

Product Details External   Mechanical Features (SPC and Basic model)
Carbide tipped measuring faces
Spindle lock clamp
Ratcher/Friction
Thimble for constant measuring force
Auto power-off after 2 hours
Origin settings
Resolution 0.001mm/0.00005in.